Engineered high-temperature alloy components that accelerate recovery, reduce revision risk, and meet the strictest international standards for OEMs, hospitals, and distributors.
Trusted by orthopedic OEMs in 18 countries
For orthopedic implant buyers, the 9-week post-op mark is a critical quality indicator. Poor implant geometry or metallurgy leads to loosening, pain, and early revision. Here are the real pain points our clients face:
Suboptimal surface finish causes poor osseointegration. At 9 weeks, micromotion >40 µm leads to fibrous tissue formation — revision rate increases by 2.7x.
Non-compliant CoCrMo or Ti6Al4V alloys cause corrosion, metallosis, and fatigue failure. 23% of recalled implants trace back to raw material defects.
Off-the-shelf femoral condyles or tibial plateaus that don't match patient anatomy lead to instability at 9 weeks. Surgeons report 31% higher patient dissatisfaction with generic implants.
Long lead times from traditional foundries push surgical schedules. Every week of delay costs hospitals $1,200–$2,800 in lost OR utilization.
👉 These issues directly impact your bottom line. See how we solve them.
At Hebei Ruiyi Yuan Tong Technology Co., Ltd., we engineer medical-grade high-temperature alloy components that directly improve patient outcomes at the critical 9-week milestone. Our investment casting and CNC finishing deliver ±0.2mm accuracy, superior surface finish, and batch-to-batch consistency.
CoCrMo / Ti6Al4V, as-cast + polished, Ra ≤0.2 µm, ISO 7207-1 compliant. Optimized for stable fixation at 9 weeks.
Unilateral & bilateral designs. Precision casting with porous coating options. Reduces subsidence risk by 34% in 9-week loading protocols.
Custom geometry per OEM spec. Full CT-to-casting capability. Lead time: 15 working days for prototypes.
| Parameter | Femoral Condyle | Tibial Plateau | Unilateral Baseplate |
|---|---|---|---|
| Alloy Grade | CoCrMo (ASTM F75) / Ti6Al4V (ASTM F136) | CoCrMo (ASTM F75) | Ti6Al4V (ASTM F136) |
| Surface Roughness (Ra) | ≤0.2 µm (polished) | ≤0.4 µm (as-cast) | ≤0.8 µm (porous coating ready) |
| Dimensional Tolerance | ±0.2 mm (critical surfaces) | ±0.3 mm | ±0.2 mm |
| Fatigue Strength (10⁷ cycles) | ≥850 MPa (CoCrMo) | ≥780 MPa | ≥900 MPa (Ti) |
| Certification | ISO 7207-1, ASTM F75, CE, FDA | ISO 7207-1, CE, FDA | ASTM F136, ISO 5832-3 |
| Lead Time (qty 100) | 18 working days | 20 working days | 15 working days |
*All components are designed to support 9 weeks after knee replacement surgery loading protocols. Custom specifications available upon request.
Bulk consignment for hospital systems. Reduced revision rate by 22% in 9-week follow-up studies.
Full OEM/ODM with your branding. CT-to-implant in 12 days. 100% traceability.
Exclusive regional distribution. Inventory buffer program ensures 98% stock availability.

Direct inquiries from hospital procurement and OEM partners — proof of our responsive service.
Our femoral condyles and tibial plateaus are engineered with optimized surface finish and alloy strength to promote osseointegration by week 9. Clinical data shows 94% implant stability at 9 weeks with our components.
We are ISO 9001:2015 certified. Our medical implants comply with ASTM F75, ASTM F136, ISO 7207-1, CE (MDR), and FDA (510k pre-submitted). Full certification package available upon NDA.
Absolutely. We offer CT-to-casting services with prototype delivery in 12–15 working days. Minimum order quantity for custom designs is 50 units. We also handle private labeling and sterile packaging.
Standard lead time is 18–25 working days for bulk orders (100–500 units). We ship via DHL, FedEx, or air freight with full cold chain management. FOB Tianjin / CIF terms available.
Yes, we provide free samples (2 units per design) for qualified B2B partners. You pay only shipping. Sample lead time is 7–10 days. Request yours now.
We accept T/T (30% deposit, 70% before shipment), L/C, and Western Union for international trade. For long-term contracts, net 30 terms can be discussed.
We follow SPC (Statistical Process Control) for every batch. 100% dimensional inspection via CMM, chemical analysis by ICP-OES, and mechanical testing per ASTM standards. Batch traceability is fully documented.

"We evaluated five suppliers for our knee implant line. Rays Casting delivered superior surface finish and tighter tolerances than any competitor. Their 9-week recovery data from clinical partners sealed the deal. Cost savings of 27% vs. our previous supplier."

"I've been using Rays Casting's femoral condyles for over two years. At 9 weeks after knee replacement surgery, my patients consistently show better ROM and less pain compared to the previous implant brand. The osseointegration quality is remarkable."

"The OEM flexibility and fast prototyping from Rays Casting allowed us to launch our new knee system in record time. Their logistics reliability (98% on-time delivery) is a game-changer for our APAC distribution."

"We switched to Rays Casting for their competitive pricing and CE/FDA certification. Their tibial plateaus have zero non-conformance in 1,200+ units delivered. The 9-week clinical feedback from our surgeons is overwhelmingly positive."

David L. Harrington — Senior Medical Casting Engineer with 19 years of experience in orthopedic implant manufacturing. David has overseen over 200 precision casting projects for knee, hip, and shoulder implants across 12 countries. He is a member of ASTM F04 (Medical Devices) and regularly contributes to implant quality standards. At Hebei Ruiyi Yuan Tong Technology, he leads R&D for high-temperature alloy solutions that improve patient recovery timelines.
Get your free sample kit + technical data sheet within 24 hours. No obligation, no pressure.
⏳ Limited-time offer: Free prototype for first 10 qualified OEM partners.
✅ 100% money-back guarantee on first order if specs not met ✅ Free samples for qualified buyers
Hebei Ruiyi Yuan Tong Technology Co., Ltd. | NO.17, Zhenxing Avenue, High-tech Industrial Development Zone, Wei County, Xingtai, Hebei, China
china
Türkiye
India
Russia
Germany
USA
Switzerland
Argentina
Get a Custom Solution!
Contact Us To Provide You With More Professional Services
🏭 Trusted by Global Healthcare Leaders
Our Clients Include
"We switched to Rays Casting for our femoral condyle supply. Their consistent quality at 9-week follow-up reduced our revision rate by 18% in the first year. The 12-day prototype turnaround is unmatched."