Reduce implant costs by up to 37% while maintaining the highest quality standards for bilateral total knee replacement procedures. Trusted by 80+ hospitals across the USA, Europe, and Asia-Pacific.
A single bilateral total knee replacement can consume up to 45% of a hospital's surgical budget. With margins tightening, procurement teams are under pressure to reduce per-case spending without sacrificing patient outcomes.
Low-cost suppliers often deliver femoral condyles and tibial trays with surface defects exceeding 0.5 mm, leading to revision rates that erode both trust and profitability. Quality variability is the #1 complaint from hospital purchasing managers.
Cross-border procurement for double knee replacement implants adds 18–25% in freight, duties, and warehousing costs. Delays at customs can postpone surgeries, impacting patient satisfaction and OR utilization rates.
Navigating CE, FDA, ISO 13485, and local registrations for bilateral total knee replacement systems is complex. One non-compliant shipment can halt an entire procurement cycle for weeks.
🔍 You are not alone — 73% of procurement managers cite these 4 pain points as their top challenges (2025 Industry Survey).
From femoral condyles to tibial plateaus — every component is investment-cast in high-temperature medical-grade alloys, with full traceability and validated mechanical properties.
Cast from CoCrMo or Ti6Al4V ELI, with surface finish ≤ 0.2 µm Ra. Available in 6 sizes for bilateral total knee replacement matching.
Precision-machined with ±0.05 mm tolerances, compatible with 3° and 5° posterior slope options. Designed for bilateral double knee replacement load-sharing.
Optimized for minimally invasive unilateral procedures, with porous coating options for enhanced osseointegration. Same-day manufacturing turnaround for urgent orders.
| Parameter | Femoral Condyle | Tibial Plateau | Unilateral Tray |
|---|---|---|---|
| Material | CoCrMo (ASTM F75) / Ti6Al4V ELI | Ti6Al4V ELI (ASTM F136) | CoCrMo / Ti6Al4V ELI |
| Surface Roughness | ≤ 0.2 µm Ra | ≤ 0.3 µm Ra | ≤ 0.25 µm Ra |
| Tolerance (machining) | ±0.05 mm | ±0.05 mm | ±0.07 mm |
| Sizes Available | 6 (XS – XL) | 5 (S – XXL) | 4 (S – L) |
| Certifications | CE, FDA, ISO 13485 | CE, FDA, ISO 13485 | CE, FDA, ISO 13485 |
*All implants are compatible with bilateral total knee replacement protocols. Custom sizes available for OEM/ODM partnerships.
A 12-hospital network in Germany standardized on our bilateral total knee replacement system, reducing implant costs by €1,200 per case and achieving 99.2% on-time delivery.
A US-based orthopedic brand partnered with us for double knee replacement implant manufacturing, achieving 40% faster time-to-market compared to their previous supplier.
+40 more


"We switched to Hebei Ruiyi Yuan Tong for our bilateral total knee replacement implants. The consistency in surface finish and fit is remarkable — revision rates dropped by 22% in the first year."

"Their OEM/ODM capability for double knee replacement systems is outstanding. Lead time reduced from 18 to 9 weeks without any compromise on quality. A true partnership."

*Screenshots shared with permission. All sensitive data blurred.
Our standard MOQ is 50 units per size for femoral condyles and tibial plateaus. For OEM/ODM partnerships, we can negotiate lower MOQs for pilot runs. Contact us for a tailored quote.
Yes, we provide full OEM/ODM design services. Our engineering team can work from your CAD files or reverse-engineer existing implants. Typical turnaround for custom samples is 4–6 weeks.
All our implants are manufactured under ISO 13485:2016 and carry CE marking (MDR) and FDA 510(k) clearance. We also comply with RoHS, REACH, and UKCA requirements.
Standard lead time is 8–10 weeks from order confirmation. For urgent consignments, we offer an expedited service at 4–5 weeks with air freight. We also hold safety stock for key SKUs.
Every batch undergoes 100% dimensional inspection (CMM), surface roughness testing, and material certification per ASTM standards. We also provide a Certificate of Conformance with each shipment.
Yes, we offer free samples for qualified hospitals and distributors. You only pay for shipping. Sample requests are typically processed within 5 business days.
We accept T/T, L/C, and PayPal for international orders. For established partners, we offer net 30/60 terms subject to credit approval. All pricing is FOB Tianjin or CIF destination.
Get a personalized quote, free samples, and a compliance checklist tailored to your market. Limited-time: free consultation for first 20 inquiries.

Written by David Liang — Senior Biomedical Manufacturing Engineer
David has spent 14 years in orthopedic implant precision casting and machining, working with over 30 hospitals and OEMs across Europe and North America. He leads R&D at Hebei Ruiyi Yuan Tong Technology Co., Ltd., focusing on double knee replacement and bilateral total knee replacement systems. All technical claims are verified against internal testing data and customer feedback.
china
Türkiye
India
Russia
Germany
USA
Switzerland
Argentina
Get a Custom Solution!
Contact Us To Provide You With More Professional Services