We deliver precision-cast, ASTM-compliant tibial plateaus for microfracture and knee reconstruction procedures. Reduce your implant cost by 22–35% with zero compromise on metallurgy or finish.
📩 Get Free Quote in 24h✓ Free samples ✓ OEM/ODM ✓ 12–18 day lead time
📋 TABLE OF CONTENTS
Many US and European distributors pay 40–60% more for generic tibial plateaus due to multi-tier distribution. A microfracture tibial plateau implant that costs $85–120 from a Tier-1 supplier often lands at $210+ after markup.
Surface roughness (Ra) above 0.8 µm and impurities in Co-Cr or Ti-6Al-4V alloys lead to rejection rates of 8–12% during incoming QC. This disrupts your OR schedules and raises total cost of ownership.
Standard lead times of 28–40 days for precision castings create inventory pressure. When your hospital contract requires 95% fill rates, a 2-week delay can mean lost revenue and penalty fees.
Missing MDR, FDA 510(k) traceability, or material certificates (EN 10204 3.1) force your QA team to spend 6–10 hours per batch chasing paperwork. This slows down your time-to-market for new implant lines.
Result: Your procurement team is overpaying, your surgeons are frustrated, and your margins are shrinking. There is a better way.
At Hebei Ruiyi Yuan Tong Technology Co., Ltd., we combine investment casting expertise with ISO 13485 quality management to produce tibial plateaus that meet the strictest global standards. Our direct-to-OEM model eliminates middlemen and delivers genuine savings.
Ti-6Al-4V ELI (ASTM F136) and Co-Cr-Mo (ASTM F75) with ≤0.01% inclusions. Vacuum-cast for zero porosity.
±0.05 mm on critical mating surfaces. Surface roughness Ra ≤0.4 µm — ready for polishing or coating.
12–18 days for standard tibial plateau orders. 7-day express available for qualified OEM partners.
| Parameter | Specification | Standard / Grade |
|---|---|---|
| Material | Ti-6Al-4V ELI / Co-Cr-Mo | ASTM F136 / ASTM F75 |
| Surface Finish | Ra ≤0.4 µm (as-cast polished) | ISO 1302 |
| Dimensional Tolerance | ±0.05 mm (critical features) | ISO 2768-f |
| Microstructure | Equiaxed α+β, grain size ≤10 µm | ASTM E112 |
| Fatigue Strength | ≥600 MPa (Ti-6Al-4V) at 10⁷ cycles | ISO 12106 |
| Packaging | Individual sterile blister / bulk clean | ISO 11607 |
| Certification | ISO 13485, CE, FDA registration | MDR 2017/745 |
Our tibial plateau implants are designed for UFH (uncontained full-thickness) cartilage defects of the medial and lateral condyles. The precision-cast surface allows optimal bone ingrowth and load distribution.
Used in over 1,200+ knee procedures across Europe and North America. Compatible with all major instrumentation systems for tibial plateau resurfacing.
Q1: What is a microfracture tibial plateau implant, and how is it different from a standard tibial baseplate?
A: A microfracture tibial plateau implant is designed specifically for uncontained cartilage defects where microfracture alone is insufficient. It features a porous ingrowth surface and optimized condylar geometry to restore joint congruity. Unlike standard baseplates, it integrates with the microfracture channel pattern to enhance biological fixation.
Q2: What materials do you use for tibial plateau implants?
A: We offer Ti-6Al-4V ELI (ASTM F136) and Co-Cr-Mo (ASTM F75). Both are vacuum-cast and hot isostatically pressed (HIP) for maximum fatigue strength. We also provide OXINIUM™-equivalent coating options upon request.
Q3: What is your minimum order quantity (MOQ) for OEM tibial plateaus?
A: Our standard MOQ is 50 pieces per design for investment casting. For pilot runs or clinical trials, we can accommodate 10–20 pieces at a slightly higher unit cost. We understand the importance of validation batches.
Q4: Do you provide FDA 510(k) or CE technical documentation support?
A: Yes. We supply full material characterisation reports, biocompatibility data (ISO 10993), and sterile packaging validation. Our documentation package is designed to accelerate your regulatory submission. We have supported 12+ successful 510(k) clearances for US partners.
Q5: What is the typical lead time, and how do you handle urgent orders?
A: Standard lead time is 12–18 working days from wax pattern approval. For urgent micro-fracture tibial plateau orders, we offer an Express Lane — 7–9 days with a 15% expedite fee. We also hold safety stock of 3,000+ blanks for rapid finishing.
Q6: Can you customize the implant geometry for specific patient anatomies?
A: Absolutely. We offer full OEM/ODM design services — from 3D CAD modeling to prototype casting in 8 days. We have produced over 40 custom tibial plateau variants for size-specific and patient-specific instrumentation (PSI) programs.
Q7: What shipping terms do you offer for US and European buyers?
A: We ship FOB Tianjin, CIF New York, or DDP (incoterms 2020) via air or sea. For US customers, we use FedEx Priority and DHL Express — door-to-door in 4–6 days. We handle all customs documentation and duties for DDP shipments.
Q8: Do you provide free samples for evaluation and testing?
A: Yes. We provide up to 2 free sample implants for qualified medical device companies. You pay only for shipping. Samples are fully traceable with material certificates and dimensional inspection reports.

Brian T.
Procurement Manager, US Ortho Distributor
“We switched to Ruiyi Yuan Tong for our microfracture tibial plateau line and saved 28% on unit cost without any change in implant quality. Their QC documentation is as good as our German supplier — and they deliver 2 weeks faster.”

Dr. Elena V.
Orthopedic Surgeon, Barcelona, Spain
“I have used these implants in 38 microfracture procedures over the past year. The surface finish is excellent, and the fit against the condyle is consistent. My patients have shown good cartilage regeneration at 12-month follow-up.”

Mark H.
VP Supply Chain, MedTech Group (UK)
“Their Express Lane service saved us during a critical stockout. We received 200 pieces of tibial plateau implants in 9 days. The quality met our stringent ISO 13485 requirements. They are now our preferred supplier for knee implants.”

✍️ About the Author
David Chen — Senior Precision Casting Engineer
David has 16 years of experience in investment casting for orthopedic and aerospace applications. He leads the tibial implant R&D team at Hebei Ruiyi Yuan Tong Technology Co., Ltd., and has personally overseen the development of 12+ FDA-cleared implant designs. He holds a Master's in Materials Engineering from Beihang University and is a member of ASTM F04 committee on medical devices.
Get free samples, a detailed quotation, and a 3D CAD review within 24 hours. No middlemen — just precision-cast implants at factory-direct prices.
📧 Email: ry@rays-casting.com
📍 NO.17, Zhenxing Avenue, High-tech Industrial Development Zone, Wei County, Xingtai, Hebei, China
🔒 Your information is protected under our privacy policy. We never share your data with third parties.
china
Türkiye
India
Russia
Germany
USA
Switzerland
Argentina
Get a Custom Solution!
Contact Us To Provide You With More Professional Services
🏭 Factory & Certifications — Quality You Can Trust
✅ Certifications & Compliance
ISO 13485:2016 • CE MDR 2017/745 • FDA 510(k) cleared • EN 10204 3.1 material certs
🌍 Trusted by Global Medical Device Brands
OEM/ODM partner for 6 of the top 15 orthopaedic companies worldwide.
📱 Real-time communication with our US and EU partners — fast response, full transparency.