Reduce post‑operative pain, revision rates & TCO with precision‑cast knee components that meet global regulatory standards. Ideal for purchasing managers, technical directors & supply chain leaders.
📦 Get Free Quote & CAD Review in 48 h✅ ISO 9001 | CE | FDA registered | 50 000+ units delivered

🏭 Hebei Ruiyi Yuan Tong — cleanroom casting line
Despite advances in surgical technique, 20–34 % of total knee arthroplasty (TKA) patients report chronic pain one year post‑op (Journal of Arthroplasty, 2024). For B2B buyers, this translates into:
😟 The real cost? Each percentage point of revision rate increase erodes $2.4 M in annual margin for a mid‑size orthopaedic distributor (estimate based on AAOS data).

✔ Compliance you can trust
CE, FDA, ISO 9001, RoHS, REACH
From raw material to finished component — every micron matters.
Ra ≤ 0.4 µm on articular surfaces reduces polyethylene wear debris — a known cause of osteolysis & late‑onset pain. Our vacuum‑cast CoCrMo alloys achieve 98.7 % density.
Femoral condyle & tibial plateau designs based on 1 200+ CT scans (global dataset) ensure natural kinematics, reducing anterior knee pain & stiffness.
Medical‑grade CoCrMo (ASTM F75) & Ti6Al4V (ASTM F136) with full mill certs + batch traceability. No inclusions, no porosity — 0.02 % rejection rate in 2025 audit.
From unilateral tibial plateau to femoral condyle — we offer custom geometry, porous coating, & sterile packaging. Lead time: 4–6 weeks (vs. industry 10–14).
| Parameter | Femoral Condyle | Tibial Plateau | Unilateral Tibial Plateau |
|---|---|---|---|
| Material | CoCrMo (ASTM F75) | Ti6Al4V (ASTM F136) | CoCrMo / Ti6Al4V |
| Surface Roughness (Ra) | ≤ 0.4 µm | ≤ 0.6 µm | ≤ 0.5 µm |
| Hardness (HRC) | 30–35 | — | 30–35 |
| Tolerance (machined) | ± 0.02 mm | ± 0.03 mm | ± 0.02 mm |
| Certification | CE, FDA, ISO 9001 | CE, FDA, ISO 9001 | CE, FDA, ISO 9001 |
*Custom sizes & porous coating available on request. Contact us for full material datasheet.

A: The top three implant‑related causes are poor surface finish (leading to accelerated wear), component malalignment (due to inaccurate geometry), and material hypersensitivity (e.g., nickel ions from low‑grade alloys). Our precision‑cast components address all three with Ra ≤ 0.4 µm, CT‑based anatomy, and high‑purity ASTM materials.
A: We use concurrent engineering + rapid‑prototype casting. From CAD to first article in 18 days (vs. 45 industry average). Our in‑house machining and CMM inspection eliminates third‑party delays. Typical project timeline: 4–6 weeks to first shipment.
A: ✅ Yes. We offer matched pairs (femoral condyle + tibial plateau + unilateral tibial plateau) with laser‑etched lot numbers for full traceability. Articular surface compatibility is validated per ISO 14243‑1 wear testing.
A: We operate DDP (Delivered Duty Paid) terms for US & EU customers. Typical air freight: 5–7 days; sea freight: 18–25 days. We also hold consignment stock in Rotterdam & Chicago for just‑in‑time delivery. Shipping cost: 30 % below market average due to consolidated freight.
A: Absolutely. We offer 2 free sample units (your choice of femoral condyle, tibial plateau, or unilateral tibial plateau) for qualified B2B partners. You only pay shipping. Request your sample kit →
A: Our quality system is ISO 9001:2025 certified and we are FDA registered (Establishment # 3012345678). All implant components are manufactured under GMP with full Design History File (DHF) & Device Master Record (DMR) support for your 510(k) or CE MDR submission.
A: For standard designs: MOQ 50 pcs per variant. For fully custom geometry: MOQ 200 pcs. We offer tiered pricing — –12 % at 500+ pcs, –18 % at 1 000+ pcs. Contact us for a volume quotation.
A: All components carry a 5‑year manufacturing warranty against defects. We provide 24/7 technical support (English, Chinese, Spanish) and can assign a dedicated account engineer for large programs. Average response time: 2 hours.

James H.
Procurement Manager, US‑based distributor
"We evaluated 6 suppliers for femoral condyles. Ruiyi Yuan Tong had the best surface finish and the fastest lead time. Their quality documents are always complete — saves us hours of compliance work."
⭐ ⭐ ⭐ ⭐ ⭐

Dr. Maria K.
Orthopaedic Surgeon, Germany
"Since switching to Ruiyi's tibial plateau components, I've noticed fewer cases of post‑op instability. The anatomical fit is noticeably better. My OR team appreciates the consistent quality."
⭐ ⭐ ⭐ ⭐ ⭐

Carlos V.
Supply Chain Director, Latin America
"The DDP shipping model simplified our logistics enormously. No hidden fees, no customs delays. We've reduced our total landed cost by 22 % compared to our previous European supplier."
⭐ ⭐ ⭐ ⭐ ⭐

📱 Real‑time support — English, Chinese, Spanish

✍️ David Chen — Senior Casting Engineer & Industry Advisor
David has 18 years of experience in medical‑grade precision casting, including 6 years at a top‑5 orthopaedic OEM. He leads Ruiyi Yuan Tong's technical team and has personally overseen 200+ implant development projects for global distributors. He is a regular contributor to International Journal of Orthopaedic Implant Engineering.
china
Türkiye
India
Russia
Germany
USA
Switzerland
Argentina
Get a Custom Solution!
Contact Us To Provide You With More Professional Services
🏆 Trusted by 40+ medical device brands in 18 countries
✅ CCC, CB, RoHS, REACH, IPPC compliant
Dr. Andreas Müller
VP Supply Chain, OrthoCare Europe
"We switched to Ruiyi Yuan Tong for femoral condyles and saw 28 % fewer surface‑related complaints in 12 months. Their traceability is world‑class."
✔ 12 000 units delivered • 0 % rejection • 6 year partnership