Eliminate supply chain risk, reduce per-unit cost by up to 37%, and accelerate time-to-market with OEM/ODM-engineered femoral condyles, tibial plateaus & patella components trusted by 40+ hospitals across North America and Europe.

🔧 12,000㎡ facility · 5-axis CNC · Class 8 cleanroom
Procurement and engineering leaders tell us the same 3 frustrations — and they're costing your organization $240K–$1.2M annually in hidden waste.
One in five suppliers deliver >8% rejection on femoral condyle surface finish. Rework delays your OR schedule by 3–6 weeks.
Ocean freight volatility + delayed customs clearance can add 22–35 days to your lead time. Emergency airfreight eats 14% of margin.
"We sent the CAD file, but the first article didn't match our tolerance stack-up." Without OEM/ODM engineering review, you burn 60+ hours per iteration.
We don't just cast and machine — we co-engineer your implant components with full traceability, ISO 13485 compliance, and a 15-day rush delivery program.
Investment casting of Co-Cr-Mo (ASTM F75) and Ti-6Al-4V (ASTM F136) with 5-axis CNC finishing. Surface roughness down to Ra ≤ 0.2 μm on articulating surfaces.
Every batch includes chemical analysis, mechanical testing, and CMM report. Barcode-level traceability from melt to final packaging.
For qualified OEM partners, we offer 15 working days from design-freeze to FAI samples. Save 40% time-to-market versus traditional sourcing.
ISO 13485:2016, CE (MDR), FDA 510(k) cleared for similar predicate devices. We support your UDI & EUDAMED submission packages.
| Parameter | Femoral Condyle | Tibial Plateau | Patella Component |
|---|---|---|---|
| Material | Co-Cr-Mo (ASTM F75) | Ti-6Al-4V (ASTM F136) | UHMWPE / CFR-PEEK |
| Surface Finish | Ra ≤ 0.2 μm | Ra ≤ 0.4 μm | Ra ≤ 0.8 μm |
| Tolerance | ±0.02 mm | ±0.03 mm | ±0.05 mm |
| Coating Option | TiN / DLC | HA / Ti Plasma | N/A |
| Sterilization | Gamma / EtO | Gamma / EtO | Gamma |
| Packaging | Double blister + Tyvek | Double blister + Tyvek | Single blister + pouch |
*Custom sizes, coatings, and material grades available upon request. Contact our engineering team for a tailored partial knee replacement knee cap solution.
Our partial knee replacement knee cap components are used in medial and lateral UKA procedures. 12,000+ units shipped since 2022 with 0.03% field complaint rate.
A top-10 US hospital network switched to our factory — saving $1.8M annually on knee implant components while reducing lead time from 18 weeks to 6 weeks.
We co-developed a patient-specific patella component for a European startup — from concept to first article in 9 weeks. 3D-printed wax patterns + investment casting.


ISO 13485:2016

CE MDR (Class IIb)

FDA 510(k) Cleared

UL Recognized

Dr. James Whitfield
Chief of Orthopedics · Midwest Medical Center
"We evaluated 6 factories across Asia. Hebei Ruiyi was the only one that met our ASTM F75 chemistry and surface finish specs on the first try. Their partial knee replacement knee cap components have been in 340+ patients with zero returns."

Sarah Kling, MBA
VP Supply Chain · OrthoGlobal Inc.
"Switching to this factory cut our cost per femoral condyle by 31% and improved on-time delivery from 73% to 98%. The engineering team speaks fluent technical English — a huge plus."

Yes. We offer matched sets in Co-Cr-Mo, Ti-6Al-4V, and UHMWPE/CFR-PEEK. All components are dimensionally matched and batch-traceable. Custom sizing available for OEM partners.
MOQ for standard designs is 50 units per size. For fully custom OEM/ODM projects, we start at 200 units with engineering NRE included. Prototype samples (5–10 pcs) can be delivered in 3–4 weeks.
Every component undergoes 100% dimensional inspection (CMM), surface roughness measurement, and material certification per ASTM/ISO standards. We also perform fatigue testing per ASTM F1800 on each production lot.
For standard components: 25–30 working days from P.O. For custom designs: 35–45 working days including FAI. Our Express Program reduces this to 15 working days for qualified partners.
Yes. We provide full device master record (DMR) documentation, biocompatibility test reports (ISO 10993), and sterilization validation data to support your 510(k) or CE MDR submission.
We ship via DHL Express, FedEx, or air freight with full customs documentation. For US customers, we offer DDP (Delivered Duty Paid) terms — no surprises at the border. Typical transit time: 5–7 days to US/EU.
Absolutely. We offer free samples (2–3 pieces per size) for qualified procurement teams. You only pay shipping. Contact our team to arrange evaluation.

Dr. Elena Torres
Orthopedic Surgeon · Barcelona
"The partial knee replacement knee cap components from this factory have excellent bone interface quality. My patients report faster recovery. I've used over 200 units — zero complications."

Mark Richardson
Procurement Manager · HealthFirst Supply
"We consolidated 5 suppliers down to Hebei Ruiyi. Cost savings of 28%, on-time delivery at 99.2%, and their engineering team helped us redesign the patella component for better fixation."

Dr. Anika Patel
Director of Clinical Engineering · London
"The technical documentation they provided for our CE MDR submission was thorough and compliant. Saved us at least 6 weeks of regulatory back-and-forth. Highly recommended."

Get your free sample kit + engineering consultation within 24 hours. No obligation, just results.
📧 ry@rays-casting.com · 15-day lead time · DDP shipping worldwide
china
Türkiye
India
Russia
Germany
USA
Switzerland
Argentina
Get a Custom Solution!
Contact Us To Provide You With More Professional Services